Search results for: 'tg:echokrys0 top 10 richest trailers in the wired'

Complete kit for a single swing gate weighing up to 300 kg / max width 4 m

CAME Connect	Encoder Motor	European Standards

Complete kit for a pair of swing gates weighing up to 500 kg per leaf / max width 3 m

CAME Connect	Encoder Motor	European Standards

Complete kit for a pair of swing gates weighing up to 300 kg per leaf / max width 4 m

CAME Connect	Encoder Motor	European Standards

Complete kit for a pair of swing gates weighing up to 300 kg per leaf / max width 7 m

CAME Connect	Encoder Motor	European Standards

Pair of surface mounted synchronized, swiveling, infrared-beam photocells rated at 12 - 24 V AC - DC and battery transmitter. Range: 10 m.

Operator with 24 V motor, featuring a control board with dip-switch settings, on-board radio decoding, movement and obstruction-detection control for sliding gates weighing up to 400 kg that are up to 10-m long

CAME Connect	European Standards

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

A.R22   Vehicle ID receiver

A.R23   Vehicle ID receiver

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 10 m

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

The VD907 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

The VD906 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Two-channel 868.35 MHz surface-mounted IP54 12 - 24 V AC - DC receiver for storing up to 50 different users (codes), with TOP, TAM, ATOMO D and TTS coding.

Four-channel surface-mounted multi-user IP54 receiver module, 24 V AC - DC to store up to 3000 different users (codes), for TOP, TAM, ATOMO D, TWIN and TTS series.

Four-channel surface-mounted multi-user IP54 receiver module, 120 - 230 V AC to store up to 3000 different users (codes), for TOP, TAM, ATOMO D, TWIN and TTS series.