Search results for: 'tg:sally530 top belt free road for metatrader 4 linkedin'

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Belt guide L = 3.02 m

Automatic barrier kit using the legacy barrier cabinet on openings up to 5m. The cabinet includes a 24Vdc gearmotor with encoder.  The cabinet is galvanised steel in a grey finish. The set comes with a tubular arm with tip support post and reflective strips. Specify left or right hand.

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

RIBS001 - Mod.4 Pinion

CGZ Module 4 rack made of 22 x 22 mm galvanized steel, 1m

The VD963A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

CGZS Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers, 1m

88001-0131 - Reduction Mechanism AXO3/4

88001-0126 - Screw Bush, Bracket AXO3/4

Red/green LED strips for booms up to 4-m long

88001-0144 - Lower, Upper Stem Shell AXO3/4

VD908  Adjustable mini-loop exit sensor

New mini-loop kit with adjustable sensitivity module and new probe 

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Antenna tuned at 433.92 MHz.

Antenna tuned at 868.35 MHz.

CGZP Module 4 rack made of 10 x 10 mm nylon, 1m

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

Perla is the hands-free wall-mounting intercom, characterized by the central blue backlit ring nut that allows to activate the many functions available.

Perla is the hands-free wall-mounting intercom, characterized by the central blue backlit ring nut that allows to activate the many functions available.