Search results for: 'tg:echokrys0 4 selt- jam base pair free terbaik fixed'

RIY006 - Anchoring Base

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Keypad with 12 keys for code entry.  The codes are held in the compatible controller. Connection is made on a 2 core cable to the controller.

Click to view SELT1 manual

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 10 m

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 30 m

Remote control featured by an elegant and refined design 433Mhz

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 20 m

RIBS001 - Mod.4 Pinion

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

88001-0131 - Reduction Mechanism AXO3/4

CGZ Module 4 rack made of 22 x 22 mm galvanized steel, 1m

88001-0126 - Screw Bush, Bracket AXO3/4

CGZS Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers, 1m

88001-0144 - Lower, Upper Stem Shell AXO3/4

Red/green LED strips for booms up to 4-m long

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

Complete kit for a pair of swing gates weighing up to 100 kg per leaf / max width 1.8 m

CAME Connect	European Standards

CGZP Module 4 rack made of 10 x 10 mm nylon, 1m