Search results for: 'tg:sally530 gate radio 230 indicator tradit with slider hotmart'

ATS50DGS - 801MP-0080 Irreversible telescopic 24 V gearmotor with encoder for swing gates with C Max. 200 mm with up to 5 m leaves that weighs up to 400 kg. RAL7024-gray color.

CAME Connect	European Standards

FTX20DLS - 801MB-0120 Irreversible 24 V gearmotor with hinged transmission-arm with C Max. 250 mm for swing gates with up to 2 m leaves that weighs up to 200 kg

CAME Connect	European Standards	Encoder Motor

FROG-CFNI Foundation box made of AISI 304 steel, with release latching lever, gate fastening brace and screw for adjusting the opening limit point.

Stand-alone GSM Gateway module for remote control of CAME automated operators with the CAME CONNECT dedicated system (002RSE module included)

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

The VD963A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

RIA062 - Motor Unit For FROG-AV

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

A.G64   call activation relay on GSM network

Straight drive arm and track with mechanical opening limit-switch.

A.G64   call activation relay on GSM network

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

Complete kit for a single swing gate weighing up to 400 kg / max width 4 m

CAME Connect	European Standards

Complete kit for a single swing gate weighing up to 300 kg / max width 7 m

CAME Connect	Encoder Motor	European Standards

Complete kit for a pair of swing gates weighing up to 400 kg per leaf / max width 4 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 1200 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 1800 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 2200 kg / max width 20 m

CAME Connect	European Standards

ATS-S3   Complete kit for a single swing gate weighing up to 400 kg per leaf / max width 3 m

CAME Connect	European Standards