Search results for: 'tg:echokrys0 top 10 frog-a x a a singl telegram'

VY808k    Waterproof rotary keyswitch

Specification: 25mm dia IP56 keyswitch Contacts : N/O, com, N/C left and right positions Cast aluminium housing : 74 x 74 x 45mm Operating temp : -5℃～+55℃

Learn More

CGZS Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers, 1m

Learn More

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

Learn More

VY808i    Waterproof illuminated exit button

Specification: 25mm stainless steel IP66 button LED : blue illumination, 12-24Vac/dc Contacts : N/O, com, N/C, isolated LED Cast aluminium housing : 74 x 74 x 45mm Operating temp : -20℃～+55℃

Learn More

RIY077 is a tri-lobe manual release key. It is used to open most Came sliding gate motor manual release covers. Once inside the sliding gate release compartment, there is a yellow knob to turn.  It also fits the manual release mechanism on Came FROG underground motor systems fitted with the A4365 release. These keys are sold singly, or in a box of ten. 

Learn More

Genovese-type, 9 mm chain for clearances of up to 8 m.

Learn More

Operator with 24 V motor, featuring a control board with dip-switch settings, on-board radio decoding, movement and obstruction-detection control for sliding gates weighing up to 400 kg that are up to 10-m long

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 10m	Max Weight: 400Kg

 

CAME Connect	European Standards

Learn More

24 V DC chain barrier post with gearmotor and built-in control panel. Learn More

A.R23   Vehicle ID receiver

Functions: Simple installation Over 300 users Wide PSU range 30m range, adjustable Dual output

Technical features: 12-30V ac/dc Iq=32mA 2x form A relay 1A @ 12V 52 x 52 x 23mm

Learn More

A.R22   Vehicle ID receiver

Functions: Simple installation Over 340 users Wide PSU range 30m range, adjustable Dual output

Technical features: 12-24V ac/dc Iq=20mA 2x form A relay 1A @ 12V 44 x 50 x 24mm

Learn More

VY350w    Waterproof locking gate magnet

Functions: 350kg holding force Dual coil, dual voltage Stainless steel housing Side fix to aluminium chassis

Technical features: 12Vdc 450mA, or 24Vdc 225mA 228 x 47 x 29mm

Learn More

VY500f   Waterproof gate locking magnet

Functions: 500kg holding force Dual coil, dual voltage Stainless steel housing Face fix to gate

Technical features: 12Vdc 480mA, or 24Vdc 240mA 222 x 62 x 38mm

Learn More

VY280t   Locking doo magnet with timer

Functions: 280kg holding force Dual voltage 0, 3, 6, or 9s delay on timer Monitored with LED Aluminium base plate

Technical features: 12-24V dc  Form C monitor relay 1A @ 12V 250 x 42 x 26mm

Learn More

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Learn More

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Learn More

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Learn More

ZA3P Multifunction control panel for two-leaved swing gates, with limit-switch control and slow-down speed adjusting.

Control Panel Features:  Limit-Switch

Motor Voltage: 230v

 

CAME Connect	European Standards

Learn More

Pair of surface mounted synchronized, swiveling, infrared-beam photocells rated at 12 - 24 V AC - DC and battery transmitter. Range: 10 m.

 

Learn More

The VD907 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

Learn More

The VD906 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

Learn More