Search results for: 'tg:echokrys0 top 10 front signal telegram'

VD908  Adjustable mini-loop exit sensor

Specification: 19mm diameter sensor 22m cable length 8-40V dc  or 8-28V ac Iq = 1.6mA, Idetect = 30mA Module size 25 x 39 x 52mm (excl conn) Environmental rating – IP65 1A @ 30Vdc volt free contacts Operating temp -35° C to 74° C

New mini-loop kit with adjustable sensitivity module and new probe 

Learn More

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

 

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

Learn More

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Learn More

The VD963A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Learn More

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Learn More

Two-channel 868.35 MHz surface-mounted IP54 12 - 24 V AC - DC receiver for storing up to 50 different users (codes), with TOP, TAM, ATOMO D and TTS coding.

 

Learn More

Four-channel surface-mounted multi-user IP54 receiver module, 24 V AC - DC to store up to 3000 different users (codes), for TOP, TAM, ATOMO D, TWIN and TTS series.

 

Learn More

Four-channel surface-mounted multi-user IP54 receiver module, 120 - 230 V AC to store up to 3000 different users (codes), for TOP, TAM, ATOMO D, TWIN and TTS series.

 

Learn More

Post with counter-weight and chain latch. for: CAT-X – CAT-X24 - CAT-X110 - CAT-X24110 Learn More

Genovese-type, 9 mm chain for clearances of up to 8 m.

Learn More

LB90 is an interface circuit board to connect two batteries to a ZL90 and ZL92 control panels. The LB90 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB90 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Click here to view LB90 manual

Click here to view LB180 manual

Learn More

24 V DC chain barrier post with gearmotor and built-in control panel. Learn More

230 V AC chain barrier post with gearmotor and built-in control panel.

Learn More

Two-channel 433.92 MHz standalone receiver. Housing is IP54 (internal). 12 to 24 V ac/dc. Stores up to 50 remotes. Compatible with TOP, TAM, ATOMO D, TWIN and TTS coding.

 

Learn More

Complete kit for a sliding gate weighing up to 3500 kg / max width 17 m

Motor Features: Encoder	Motor Voltage: 230v (Three-Phase)
Max Length: 17m	Max Weight: 3500Kg

 

Three-Phase	European Standards

Learn More

Complete kit for a sliding gate weighing up to 1000 kg / max width 20 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 20m	Max Weight: 1000Kg

 

CAME Connect	European Standards

Learn More

FAST70-S  Complete kit for a single swing gate weighing up to 200 kg / max width 2.3 m

Motor Features: Time of run / Limit Switches	Motor Voltage: 230v
Max Length: 2.3m	Max Weight: 200Kg

 

CAME Connect	European Standards

Learn More

Complete kit for a pair of swing gates weighing up to 200 kg per leaf / max width 1.8 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 1.8m	Max Weight: 200Kg

 

CAME Connect	European Standards

Learn More

Complete kit for a sliding gate weighing up to 400 kg / max width 14 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 14m	Max Weight: 400Kg

 

CAME Connect	European Standards

Learn More

Complete kit for a sliding gate weighing up to 600 kg / max width 18 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 18m	Max Weight: 600Kg

 

CAME Connect	European Standards

Learn More