Search results for: 'tg:rebate521 expans review 2.2m is extern a good base'

Irreversible gearmotor for swing gates up to 2.2 m per leaf.

CAME Connect	European Standards

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

TOP44FGN is a fixed code remote with four buttons transmitting on 433MHz. Note the black ring around the black buttons; any other coloured ring is not compatible. It not a style thing! Each button can be have a code cloned onto it by a compatible remote. 

RIY077 is a tri-lobe manual release key. It is used to open most Came sliding gate motor manual release covers. Once inside the sliding gate release compartment, there is a yellow knob to turn.  It also fits the manual release mechanism on Came FROG underground motor systems fitted with the A4365 release. These keys are sold singly, or in a box of ten. 

RIR306 - Transformer For ZL90 ZLJ14

A4364 Release device with lever key

A4365 Release device with trilobe key

FROG-CFNI Foundation box made of AISI 304 steel, with release latching lever, gate fastening brace and screw for adjusting the opening limit point.

A4366 Release device with customized key and EURO-DIN cylinder

A4370 Drive lever for openings of up to 140° and gate leaves of max. 2 m in length.

RIR090 - Transformer For BX ZA3 ZA4 ZA5 ZC5 ZF1 ZM2

FROG-CFN Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

Folding drive arm

Straight drive arm and track with mechanical opening limit-switch.

801XA-0040    -    Cog driven 180° adaptor for openings of up to 180° and gate leaves of max. 2 m in length.

FL180    -    Chain driven 180° adaptor for openings of up to 180° and gate leaves of max. 2 m in length.

Irreversible 24 V gearmotor with encoder for swing gates with up to 5 m leaves that weighs up to 400 kg.

CAME Connect	European Standards	Encoder Motor