Search results for: 'tg:echokrys0 is your free border a semi investopedia'

Fastening flange for semi-oval section boom.

Inner reinforcement for semi-oval section barrier; indispensable for gross clearances exceeding 2.5 m.

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Semi-oval section barrier arm in white aluminum alloy.  A yellow rubber bump strip is fitted in a groove under the arm. Arm length is 4m for 3.75m opening.

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

The SEL-B communicates with your phone using Wifi. Download the AUTOMATION BT app and operate the gate from your phone. If enabled, your phone can open the gate automaically when it is in range.

The SEL-B takes a multicore cable. Power is 12 or 24V ac/dc. The package is IP54 .     Click to view Bluetooth Selector Manual

Swing rest.

Integrated, dome flashing light.

Cable for connecting the luminous cord.

Support for fitting DIR-series photocells.

Package of 20 red, reflective, adhesive strips.

Reinforcement for the clamp-end. Essential for passage clearances of over 4 m.

Reinforcement for the clamp-end. Essential for passage clearances of over 4 m.

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

DOC-I Flush fitting safety or free exit photocells 20m range. ~ Replaced With The DLX30CIP

DLX30CIP - Direct Replacement

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

Perla is the hands-free wall-mounting intercom, characterized by the central blue backlit ring nut that allows to activate the many functions available.

Perla is the hands-free wall-mounting intercom, characterized by the central blue backlit ring nut that allows to activate the many functions available.

Perla is the hands-free wall-mounting intercom, characterized by the central blue backlit ring nut that allows to activate the many functions available.