Search results for: 'data e'

DOC-E Surface fitting safety photocells 20m range ~ Replaced With The DLX30CEP

DLX30CEP - Direct Replacement

DLX30CEP is Came's latest traditional square surface photobeam. It replaced DELTA-E and DOC-E. 

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

MTM VR ZAMAK GSM Audio Vandal resistant GSM Kit, surface or flush mounting, 1-10buttons, with or without keypad, with or without proximity reading. 

VRW GSM Audio GSM Kit, surface or flush mounting, with or without keypad, with or without proximity reading. 

MTM VR ZAMAK Vandal Resistant, Audio Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard GSM Audio GSM Kit, surface or flush mounting, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard with Agata Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

GSM Gateway module with built-in radio, for remote control of CAME automated operators with the CAME CONNECT dedicated system (002RSE module included). For controlling up to five slave modules.

Stand-alone GSM Gateway module for remote control of CAME automated operators with the CAME CONNECT dedicated system (002RSE module included)

MTM Standard with Perla Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard with Opale Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard with XTS7 Monitor IP Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

ZBX7N PCB Replacement PCB

CAME Connect	European Standards	Encoder Motor

LB90 is an interface circuit board to connect two batteries to a ZL90 and ZL92 control panels. The LB90 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB90 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Click here to view LB90 manual

Click here to view LB180 manual

Antenna tuned at 433.92 MHz.

Antenna tuned at 868.35 MHz.