Search results for: '【Tg:sally530】-The 8 best indicators for crypto trading in 2024 | OKX'

Complete kit for a single swing gate weighing up to 500 kg / max width 3 m

CAME Connect	Encoder Motor	European Standards

Complete kit for a single swing gate weighing up to 300 kg / max width 4 m

CAME Connect	Encoder Motor	European Standards

Complete kit for a pair of swing gates weighing up to 500 kg per leaf / max width 3 m

CAME Connect	Encoder Motor	European Standards

Complete kit for a pair of swing gates weighing up to 300 kg per leaf / max width 4 m

CAME Connect	Encoder Motor	European Standards

Complete kit for a pair of swing gates weighing up to 300 kg per leaf / max width 7 m

CAME Connect	Encoder Motor	European Standards

The VD959 'Dynamite' Adjustable vehicle loop detector is an absolute favorite for an EXIT sensor / Loop detector that requires no loops to be cut and is self setting, so takes a quarter of the time to install than the traditional loop detectors.

VD909   Mini-loop exit sensor

'Dynamite' vehicle sensors are the market leading detectors. No loops to cut. Self setting. The no brainer alternative to traditional exit loops.

Genovese-type, 9 mm chain for clearances of up to 8 m.

Keypad module with access control.Electronic module with techno-polymer body, with alphanumeric keypad with 12 buttons and double blue or white backlighting. Adjustable color and brightness of the LEDs using the main modules. Key 0 to 9 for entering the code and 2 other keys for confirming. 

ZBKN is the replacement control panel for BK1200, BK1800, and BK2200. ZBKN is standard issue on BKS1200, BKS1800 and BKS2200. The original ZBK control panel was identified by a line of 20 DIP switches. It is no longer available. The new ZBKN has three 7 segment displays and a menu system to make settings. The connectors are largely the same, so it is a direct replacement. There are many  new feature enabled on this new panel. 

Replacement control panel for legacy barriers G4000 and G6000.  ZL37 uses slow down microswitches. The later ZL392 uses an encoder input. Barrier arm speed is selected by moving transformer taps.

Click here to view the ZL37F manual

DELTA-I Pair of 12 – 24 V AC – DC recess-mounted photocells with casing. ~ Replaced With The DLX30CIP

DLX30CIP - Direct Replacement

DELTA-E Pair of surface-mounted 12 – 24 V AC – DC photocells with casing.Range 20 m. ~ Replaced With The DLX30CEP

DLX30CEP - Direct Replacement

Replacement control panel for legacy barriers GARD4 and GARD6.  ZL39B uses slow down microswitches. The later ZL392 uses an encoder input. Barrier arm speed is selected by moving transformer taps.

Complete kit for a sliding gate weighing up to 1200 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 1800 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 2200 kg / max width 20 m

CAME Connect	European Standards

Complete VER10 garage door motor kit with belt guide

Encoder Motor	European Standards

Complete VER13 garage door motor kit with belt guide

Encoder Motor	European Standards

Complete VER06 garage door motor kit with belt guide

Encoder Motor	European Standards