Search results for: 'tg:joanneforex top 10 telegram free channel 230 easycashbackforex'

Irreversible 230 V gearmotor with hinged transmission arm and C Max. 380 mm for swing gates with with up to 4 m leaves that weighs up to 400 kg.

Motor Features: Encoder	Motor Voltage: 230v
Max Length: 4m	Max Weight: 400Kg

 

CAME Connect	European Standards

Learn More

A3000 - Telescopic 230 V gearmotor for swing gates up to 3 m leaves that weighs up to 400 kg. 

Motor Features: Time of Run	Motor Voltage: 230v
Max Length: 3m	Max Weight: 400Kg

 

CAME Connect	European Standards

Learn More

VD908  Adjustable mini-loop exit sensor

Specification: 19mm diameter sensor 22m cable length 8-40V dc  or 8-28V ac Iq = 1.6mA, Idetect = 30mA Module size 25 x 39 x 52mm (excl conn) Environmental rating – IP65 1A @ 30Vdc volt free contacts Operating temp -35° C to 74° C

New mini-loop kit with adjustable sensitivity module and new probe 

Learn More

Irreversible 24 V gearmotor with encoder for swing gates with up to 5 m leaves that weighs up to 400 kg.

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 5m	Max Weight: 400Kg

 

CAME Connect	European Standards	Encoder Motor

Learn More

ATS30AGS - 801MP-0050 Irreversible telescopic 230 V gearmotor for swing gates with C Max. 200 mm with up to 3 m leaves that weighs up to 400 kg.

Motor Features: Time of run	Motor Voltage: 230v
Max Length: 3m	Max Weight: 400Kg

 

CAME Connect	European Standards

Learn More

ATS50AGS - 801MP-0060 Irreversible telescopic 230 V gearmotor for swing gates with C Max. 200 mm with up to 5 m leaves that weighs up to 400 kg.

Motor Features: Time of run	Motor Voltage: 230v
Max Length: 5m	Max Weight: 400Kg

 

CAME Connect	European Standards

Learn More

FA7024 Irreversible 24 V gearmotor with hinged transmission arm and C Max. 200 mm for swing gates with with up to 2.3 m leaves that weighs up to 200 kg

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 2.3m	Max Weight: 200Kg

 

CAME Connect	European Standards	Encoder Motor

Learn More

Irreversible 24 V gearmotor, rapid version, with hinged transmission arm and C Max. 380 mm for swing gates with up to 4 m leaves that weighs up to 400 kg.

Motor Features: Encoder / RAPID	Motor Voltage: 24v
Max Length: 4m	Max Weight: 400Kg

 

CAME Connect	European Standards

Learn More

A5024N - Telescopic 24V gearmotor for swing gates up to 5 m leaves that weighs up to 400 kg. 

Motor Features: Time of Run	Motor Voltage: 24v
Max Length: 5m	Max Weight: 400Kg

 

CAME Connect	European Standards

Learn More

ZLX24SA - Multifunctional control panel, with 230 V AC power supply, for 24 V double-leaf gates, with programming and graphical signaling display, self-diagnosis of safety devices, Adaptive Speed & Torque Technology, CXN BUS, 4 safety inputs and storage for up to 1000 users.

Control Panel Features:  Encoder

Motor Voltage: 24v

 

CAME Connect	European Standards	Encoder Motor

Learn More

The VD963A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Learn More

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

 

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

Learn More

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Learn More

Post with counter-weight and chain latch. for: CAT-X – CAT-X24 - CAT-X110 - CAT-X24110 Learn More

Genovese-type, 9 mm chain for clearances of up to 8 m.

Learn More

24 V DC chain barrier post with gearmotor and built-in control panel. Learn More

LB90 is an interface circuit board to connect two batteries to a ZL90 and ZL92 control panels. The LB90 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB90 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Click here to view LB90 manual

Click here to view LB180 manual

Learn More

Complete kit for a single swing gate weighing up to 500 kg / max width 3 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 3m	Max Weight: 500Kg

 

CAME Connect	Encoder Motor	European Standards

Learn More

Complete kit for a pair of swing gates weighing up to 400 kg per leaf / max width 5 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 5m	Max Weight: 400Kg

 

CAME Connect	Encoder Motor	European Standards

Learn More

Complete kit for a single swing gate weighing up to 400 kg / max width 5 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 5m	Max Weight: 400Kg

 

CAME Connect	Encoder Motor	European Standards

Learn More