Search results for: 'tg:sally530 good frog-x singl telegram'

CGZ6 - Galvanized rack module 6 in 30 x 30 laminated steel, 1m

Learn More

CGZ Module 4 rack made of 22 x 22 mm galvanized steel, 1m

Learn More

CGZS Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers, 1m

Learn More

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

Learn More

VD908  Adjustable mini-loop exit sensor

Specification: 19mm diameter sensor 22m cable length 8-40V dc  or 8-28V ac Iq = 1.6mA, Idetect = 30mA Module size 25 x 39 x 52mm (excl conn) Environmental rating – IP65 1A @ 30Vdc volt free contacts Operating temp -35° C to 74° C

New mini-loop kit with adjustable sensitivity module and new probe 

Learn More

VY280t   Locking doo magnet with timer

Functions: 280kg holding force Dual voltage 0, 3, 6, or 9s delay on timer Monitored with LED Aluminium base plate

Technical features: 12-24V dc  Form C monitor relay 1A @ 12V 250 x 42 x 26mm

Learn More

Post with counter-weight and chain latch. for: CAT-X – CAT-X24 - CAT-X110 - CAT-X24110 Learn More

RIY077 is a tri-lobe manual release key. It is used to open most Came sliding gate motor manual release covers. Once inside the sliding gate release compartment, there is a yellow knob to turn.  It also fits the manual release mechanism on Came FROG underground motor systems fitted with the A4365 release. These keys are sold singly, or in a box of ten. 

Learn More

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Learn More

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Learn More

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Learn More

A.R22   Vehicle ID receiver

Functions: Simple installation Over 340 users Wide PSU range 30m range, adjustable Dual output

Technical features: 12-24V ac/dc Iq=20mA 2x form A relay 1A @ 12V 44 x 50 x 24mm

Learn More

FA.T80   CoBRA programmable beam

Specification: 7 fixed ranges plus full adjustment 10-30V dc   10-24V ac Iq = 65mA, Idetect = 28mA Dimensions 37 x 36 x 108mm Environmental rating – IP65 0.8A @ 30Vdc volt free N/O or N/C Operating temp -10° C to 60° C

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Learn More

A.R23   Vehicle ID receiver

Functions: Simple installation Over 300 users Wide PSU range 30m range, adjustable Dual output

Technical features: 12-30V ac/dc Iq=32mA 2x form A relay 1A @ 12V 52 x 52 x 23mm

Learn More

FA.T80   CoBRA programmable beam

Specification: 7 fixed ranges plus full adjustment 10-30V dc   10-24V ac Iq = 65mA, Idetect = 28mA Dimensions 37 x 36 x 108mm Environmental rating – IP65 0.8A @ 30Vdc volt free N/O or N/C Operating temp -10° C to 60° C

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Learn More

VY808s    Waterproof exit button

Specification: 25mm stainless steel IP66 button Contacts : N/O, com, N/C, isolated LED Cast aluminium housing : 74 x 74 x 45mm Operating temp : -20℃～+55℃

Learn More

VY808t    Wireless waterproof exit button

Specification: 25mm stainless steel IP66 button Remote signal : learning 433MHz fixed code Cast aluminium housing : 74 x 74 x 45mm Operating temp : -20℃～+55℃

Learn More

VY808k    Waterproof rotary keyswitch

Specification: 25mm dia IP56 keyswitch Contacts : N/O, com, N/C left and right positions Cast aluminium housing : 74 x 74 x 45mm Operating temp : -5℃～+55℃

Learn More

VY808i    Waterproof illuminated exit button

Specification: 25mm stainless steel IP66 button LED : blue illumination, 12-24Vac/dc Contacts : N/O, com, N/C, isolated LED Cast aluminium housing : 74 x 74 x 45mm Operating temp : -20℃～+55℃

Learn More

ZA3P Multifunction control panel for two-leaved swing gates, with limit-switch control and slow-down speed adjusting.

Control Panel Features:  Limit-Switch

Motor Voltage: 230v

 

CAME Connect	European Standards

Learn More