Search results for: 'tg:sally530 good frog x singl telegram'

FROGAE-P  Complete kit for a pair of swing gates weighing up to 400 kg / max width 3.5m

Motor Features: Encoder	Motor Voltage: 230v
Max Length: 3.5m	Max Weight: 800Kg

 

CAME Connect	European Standards	Encoder Motor

Learn More

Complete kit for a pair of swing gates weighing up to 400 kg / max width 3.5m

Motor Features: Encoder / Low Voltage	Motor Voltage: 24v
Max Length: 3.5m	Max Weight: 800Kg

 

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Learn More

CGZ6 - Galvanized rack module 6 in 30 x 30 laminated steel, 1m

Learn More

Complete kit for a pair of swing gates weighing up to 400 kg / max width 3.5m

Motor Features: Brushless motor with encoder	Motor Voltage: 24v
Max weight & length: 400kg @ 3.5m       800kg @ 2m	Features Sensitive pressure reversal

 

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Learn More

CGZ Module 4 rack made of 22 x 22 mm galvanized steel, 1m

Learn More

CGZS Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers, 1m

Learn More

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

Learn More

VD908  Adjustable mini-loop exit sensor

Specification: 19mm diameter sensor 22m cable length 8-40V dc  or 8-28V ac Iq = 1.6mA, Idetect = 30mA Module size 25 x 39 x 52mm (excl conn) Environmental rating – IP65 1A @ 30Vdc volt free contacts Operating temp -35° C to 74° C

New mini-loop kit with adjustable sensitivity module and new probe 

Learn More

VY280t   Locking doo magnet with timer

Functions: 280kg holding force Dual voltage 0, 3, 6, or 9s delay on timer Monitored with LED Aluminium base plate

Technical features: 12-24V dc  Form C monitor relay 1A @ 12V 250 x 42 x 26mm

Learn More

Post with counter-weight and chain latch. for: CAT-X – CAT-X24 - CAT-X110 - CAT-X24110 Learn More

A.R22   Vehicle ID receiver

Functions: Simple installation Over 340 users Wide PSU range 30m range, adjustable Dual output

Technical features: 12-24V ac/dc Iq=20mA 2x form A relay 1A @ 12V 44 x 50 x 24mm

Learn More

RIY077 is a tri-lobe manual release key. It is used to open most Came sliding gate motor manual release covers. Once inside the sliding gate release compartment, there is a yellow knob to turn.  It also fits the manual release mechanism on Came FROG underground motor systems fitted with the A4365 release. These keys are sold singly, or in a box of ten. 

Learn More

FA.T80   CoBRA programmable beam

Specification: 7 fixed ranges plus full adjustment 10-30V dc   10-24V ac Iq = 65mA, Idetect = 28mA Dimensions 37 x 36 x 108mm Environmental rating – IP65 0.8A @ 30Vdc volt free N/O or N/C Operating temp -10° C to 60° C

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Learn More

A.R23   Vehicle ID receiver

Functions: Simple installation Over 300 users Wide PSU range 30m range, adjustable Dual output

Technical features: 12-30V ac/dc Iq=32mA 2x form A relay 1A @ 12V 52 x 52 x 23mm

Learn More

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Learn More

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Learn More

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Learn More

FA.T80   CoBRA programmable beam

Specification: 7 fixed ranges plus full adjustment 10-30V dc   10-24V ac Iq = 65mA, Idetect = 28mA Dimensions 37 x 36 x 108mm Environmental rating – IP65 0.8A @ 30Vdc volt free N/O or N/C Operating temp -10° C to 60° C

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Learn More

VY808s    Waterproof exit button

Specification: 25mm stainless steel IP66 button Contacts : N/O, com, N/C, isolated LED Cast aluminium housing : 74 x 74 x 45mm Operating temp : -20℃～+55℃

Learn More

VY808t    Wireless waterproof exit button

Specification: 25mm stainless steel IP66 button Remote signal : learning 433MHz fixed code Cast aluminium housing : 74 x 74 x 45mm Operating temp : -20℃～+55℃

Learn More