Search results for: '【Tg:Rebate56】-Is the WolfX signal legit'

A.G64   call activation relay on GSM network

VY808s    Waterproof exit button

TOP44FGN is a fixed code remote with four buttons transmitting on 433MHz. Note the black ring around the black buttons; any other coloured ring is not compatible. It not a style thing! Each button can be have a code cloned onto it by a compatible remote. 

VY808i    Waterproof illuminated exit button

A.G64   call activation relay on GSM network

A.R23   Vehicle ID receiver

DLX30CEP is Came's latest traditional square surface photobeam. It replaced DELTA-E and DOC-E. 

DLX30CIP is Came's latest traditional square flush photobeam. It replaced DELTA-I and DOC-I. 

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

A.R22   Vehicle ID receiver

Tip support post for fixing to a barrier arm where a fixed tip support post is not suitable.

G4000 are issued with the arm clamp for a rectangular arm. This G0405 is required for fitting a 60mm diameter tubular arm.

G6000 are issued with the arm clamp for a rectangular arm. This G0605 is required for fitting a 100mm diameter tubular arm.

RSLV001 is a GSM gateway for Came control panels. The Came app 'CAMEconnect' can operate and edit control panel operation via SMS received by the RSLZ001.

This set includes the 002RSE serial module that plugs into recent control panels. Check that your control panel is compatible.

LB90 is an interface circuit board to connect two batteries to a ZL90 and ZL92 control panels. The LB90 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB90 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Click here to view LB90 manual

Click here to view LB180 manual

Barrier cabinet for legacy barriers on openings up to 4m. The G4000 is suitable for replacement only. The cabinet includes gearmotor, control panel, and counterbalance springs. Specify left orright hand.

Barrier cabinet for legacy barriers on openings up to 6.5m. The G6000 is suitable for replacement only. The cabinet includes gearmotor, control panel, and counterbalance springs. Specify left or right hand.

Barrier cabinet for legacy barriers on openings up to 5m. The G5000 is suitable for replacement only. The cabinet includes gearmotor, control panel, and counterbalance springs. Specify left or right hand.

A.K15   Realtime keypad