Search results for: 'tg:rebate567 10 top good termin tips.docx pdfcoffee.com'

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

The SEL-B communicates with your phone using Wifi. Download the AUTOMATION BT app and operate the gate from your phone. If enabled, your phone can open the gate automaically when it is in range.

The SEL-B takes a multicore cable. Power is 12 or 24V ac/dc. The package is IP54 .     Click to view Bluetooth Selector Manual

RIY077 is a tri-lobe manual release key. It is used to open most Came sliding gate motor manual release covers. Once inside the sliding gate release compartment, there is a yellow knob to turn.  It also fits the manual release mechanism on Came FROG underground motor systems fitted with the A4365 release. These keys are sold singly, or in a box of ten. 

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

Two-channel multiuser transmitter with self-learning function 433Mhz

Four-channel multiuser transmitter with self-learning function 433Mhz

Two-channel multiuser transmitter with self-learning function 868Mhz

Four-channel multiuser transmitter with self-learning function 868Mhz

VD909   Mini-loop exit sensor

'Dynamite' vehicle sensors are the market leading detectors. No loops to cut. Self setting. The no brainer alternative to traditional exit loops.

Cordless, surface-mounted bi-directional, infrared beam modules, with double contact output and built-in receiver. External battery-powered transmitter.Range: 10 m.

Cordless, surface-mounted bi-directional, infrared beam modules, with single contact output and built-in receiver. External battery-powered transmitter.Range: 10 m.

Pair of surface-mounted cordless photocells, with mono-directional infrared beam, made up of: one receiver + one battery-operated transmitter. Range: 10 m.

AXL-P   Complete kit for a pair of swing gates weighing up to 250 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

AXI25DG-S Complete kit for a single swing gate weighing up to 300 kg per leaf / max width 2.5 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

The VD959 'Dynamite' Adjustable vehicle loop detector is an absolute favorite for an EXIT sensor / Loop detector that requires no loops to be cut and is self setting, so takes a quarter of the time to install than the traditional loop detectors.

Complete VER10 garage door motor kit with belt guide

Encoder Motor	European Standards

Complete VER13 garage door motor kit with belt guide

Encoder Motor	European Standards

Complete VER06 garage door motor kit with belt guide

Encoder Motor	European Standards