Search results for: 'tg:sally530 gard frog-a x a a singl telegram'

ATS-S524   Complete kit for a swing gate weighing up to 400 kg per leaf / max width 5 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

RIA088 - Motor Unit - FROG-A24E/A24

RIA058 - FROG-A24 Limit Switch Support

RIA063 - Motor Unit For FROG-AL

FROG-PM6  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 7 m leaves that weighs up to 550kg.

CAME Connect	European Standards	Encoder Motor

FROG-PM4  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 5.5m leaves that weighs up to 700kg.

CAME Connect	European Standards	Encoder Motor

RIA062 - Motor Unit For FROG-AV

White painted aluminum 90 x 60 mm, complete with internal reinforcement, hollow cover profiles and shockproof rubber profile. Length: 4220 mm.

LOCK81 Single cylinder electric lock

230 V AC chain barrier post with gearmotor and built-in control panel.

FROG-PC Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

FROG-CFNI Foundation box made of AISI 304 steel, with release latching lever, gate fastening brace and screw for adjusting the opening limit point.

FROG-CFN Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

FROGAE  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 3.5 m leaves that weighs up to 400 kg.

CAME Connect	European Standards	Encoder Motor

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

CGZP Module 4 rack made of 10 x 10 mm nylon, 1m

Semi-oval section barrier arm in white aluminum alloy.  A yellow rubber bump strip is fitted in a groove under the arm. Arm length is 4m for 3.75m opening.

Oval section barrier arm in white aluminum alloy. This version does not have the yellow bump strip. The arm has side grooves with a cover strip for the optional lighting pipe. Arm length is 4 m for a 3.75m opening.

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913