Search results for: 'tg:eatradingsignals belt free signal in telegram top good wemastertrade'

Tip support post for fixing to a barrier arm where a fixed tip support post is not suitable.

Barrier arm for G4000 cabinets, white 60mm diameter. Fits the G0405 arm clamp. The G0461 reflective strips are recommended.

Inner reinforcement for semi-oval section barrier; indispensable for gross clearances exceeding 2.5 m.

Balancing springs for CAME barriers.

G4000 are issued with the arm clamp for a rectangular arm. This G0405 is required for fitting a 60mm diameter tubular arm.

G6000 are issued with the arm clamp for a rectangular arm. This G0605 is required for fitting a 100mm diameter tubular arm.

Barrier cabinet for legacy barriers on openings up to 6.5m. The G6000 is suitable for replacement only. The cabinet includes gearmotor, control panel, and counterbalance springs. Specify left or right hand.

Barrier arm for G4000 cabinets, white 60x40mm. There are slots in each corner to take the red rubber strip part G0403. The G0461 reflective strips are recommended.

Aluminium hanging skirt in 2m lengths. Suitable for larger barriers. Springs will need to be upgraded or adjusted to take the extra weight.

Barrier cabinet for legacy barriers on openings up to 4m. The G4000 is suitable for replacement only. The cabinet includes gearmotor, control panel, and counterbalance springs. Specify left orright hand.

Barrier cabinet for legacy barriers on openings up to 5m. The G5000 is suitable for replacement only. The cabinet includes gearmotor, control panel, and counterbalance springs. Specify left or right hand.

*Please Note - This product will Ship at 6.0m.  If you require the full 6340mm, please contact us on 01491680500 before purchasing this product*

White painted tube-section aluminum boom, with groove covering profile. Ø 100 mm, boom length: 2-6 m.

Semi-oval section barrier arm in white aluminum alloy.  A yellow rubber bump strip is fitted in a groove under the arm. Arm length is 4m for 3.75m opening.

Oval section barrier arm in white aluminum alloy. This version does not have the yellow bump strip. The arm has side grooves with a cover strip for the optional lighting pipe. Arm length is 4 m for a 3.75m opening.

Barrier arm for G6000 cabinets, white 100mm diameter. This arm fits the G0605 arm clamp. The G0461 reflective strips are recommended.

Fixed rest.

Replacement control panel for legacy barriers GARD4 and GARD6.  ZL39B uses slow down microswitches. The later ZL392 uses an encoder input. Barrier arm speed is selected by moving transformer taps.