Search results for: 'tg:tsuki717 card you taxabl on tradingview without a bracket'

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

RIR083 - Microswitch without lever

88001-0158 - Bracket Accessories

A.G64   call activation relay on GSM network

RID303 - Back Bracket AXO5/7

88003-0076 - Closing Bracket GT4

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

88001-0125 - Nut. Bushing, Bracket ATI3

Control card kit for operating during power outages and for recharging batteries, with battery housing

88001-0126 - Screw Bush, Bracket AXO3/4

88001-0195 - Screw, Bush, Bracket AXO5/7

88003-0107 - Spring Upper Hook Bracket GT8

RID062 - Back Bracket for AMICO ATI AXO KRONO

R700 plugs into recent PCB's to interface card reader selectors to the control panel.

RIA043 - Gate Hooking Bracket

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500