Search results for: 'tg:sally530 good paint and secur deciphering the three dailyfx'

White painted aluminum 90 x 60 mm, complete with internal reinforcement, hollow cover profiles and shockproof rubber profile. Length: 4220 mm.

Operator with 230 - 400 V motor, featuring a control board, on-board radio decoding and mechanical limit-switches for sliding gates weighing up to 3500 kg that are up to 17-m long.

Three-Phase	European Standards

The VD906 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

Complete kit for a sliding gate weighing up to 3500 kg / max width 17 m

Three-Phase	European Standards

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

Automatic barrier with reversible brushless gear motor; painted aluminum wardrobe with set up for fitting accessories. Balancing springs included.

CAME Connect	European Standards

Automatic barrier with irreversible brushless gear motor; galvanized and painted steel cabinet with set up for fitting accessories. Balancing springs included.

CAME Connect	European Standards

Automatic barrier with 24 V DC operator with encoder; galvanised steel and painted cabinet with set up for fitting accessories. Balancing springs included.

CAME Connect	European Standards

Automatic barrier with 24 V DC operator with encoder; galvanised steel and painted cabinet with set up for fitting accessories. Balancing spring included.

CAME Connect	European Standards

White painted tube-section aluminum boom, with groove covering profile. Ø 100 mm, boom length: 2-6 m.

Deluxe Gard GT4 barrier kit for road widths of up to 4m. Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Deluxe Gard GT8 barrier kit for road widths of up to 8m.  Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Two way sprung loaded keyswitch. High security euro-cylinder. 

Used for hold to run applications such as roller shutter opening and closing. Hold to run is also required for automation where safety is critical, and the operator is required to to have visual contact with the risk zone.

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

VY350w    Waterproof locking gate magnet

VY500f   Waterproof gate locking magnet

Two-channel 433.92 MHz standalone receiver. Housing is IP54 (internal). 12 to 24 V ac/dc. Stores up to 50 remotes. Compatible with TOP, TAM, ATOMO D, TWIN and TTS coding.