Search results for: 'tg:kaia770 loop via gard tradit roll discussion myfxbook.com'

100m drum of single core rubber loop cable for use with: VD907, VD906, VD955 detectors

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

The VD907 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

The VD906 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

Remote control featured by an elegant and refined design 433/868Mhz

VD908  Adjustable mini-loop exit sensor

New mini-loop kit with adjustable sensitivity module and new probe 

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

The VD963A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Deluxe Gard GT4 barrier kit for road widths of up to 4m. Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Deluxe Gard GT8 barrier kit for road widths of up to 8m.  Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

DLX30CEP is Came's latest traditional square surface photobeam. It replaced DELTA-E and DOC-E. 

DLX30CIP is Came's latest traditional square flush photobeam. It replaced DELTA-I and DOC-I. 

Semi-oval section barrier arm in white aluminum alloy.  A yellow rubber bump strip is fitted in a groove under the arm. Arm length is 4m for 3.75m opening.

Oval section barrier arm in white aluminum alloy. This version does not have the yellow bump strip. The arm has side grooves with a cover strip for the optional lighting pipe. Arm length is 4 m for a 3.75m opening.

868.35 MHz surface-mounted, 12-key radio keypad selector, with blue backlight, 25 savable codes and password to access the programming mode. Settable in Rolling Code or Fixed Code mode.

433.92 MHz surface-mounted, 12-key radio keypad selector, with blue backlight, 25 savable codes and password to access the programming mode. Settable in Rolling Code or Fixed Code mode.

White painted tube-section aluminum boom, with groove covering profile. Ø 100 mm, boom length: 2-6 m.

Two-channel 433.92 MHz standalone receiver. Housing is IP54 (internal). 12 to 24 V ac/dc. Stores up to 50 remotes. Compatible with TOP, TAM, ATOMO D, TWIN and TTS coding.

Complete kit for a single swing gate weighing up to 500 kg / max width 3 m

CAME Connect	Encoder Motor	European Standards