Search results for: 'extractvalue 1 contact card 12 md5 1836022405'

Keypad with 12 keys for code entry.  The codes are held in the compatible controller. Connection is made on a 2 core cable to the controller.

Click to view SELT1 manual

Sensitive safety edge made of rubber, with mechanical contact.L = 1,700 mm.

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

Auxiliary contacts unit for detecting the boom position

Sensitive safety edge made of rubber, with mechanical contact.L = 1,500 mm.

Sensitive safety edge made of rubber, with mechanical contact.L = 2,000 mm.

Sensitive safety edge made of rubber, with mechanical contact.L = 2,500 mm.

Control card kit for operating during power outages and for recharging batteries, with battery housing

R700 plugs into recent PCB's to interface card reader selectors to the control panel.

VY808s    Waterproof exit button

VY808i    Waterproof illuminated exit button

A.G64   call activation relay on GSM network

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 20 m

VY808k    Waterproof rotary keyswitch

Circuit board for self-diagnosing the electrical connections, 12 - 24 V AC – DC.

FTX-P   Complete kit for a pair of swing gates weighing up to 200 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

FTX-S   Complete kit for a single swing gate weighing up to 200 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

The VD907 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.