Search results for: 'tg:kaia770 fixed exception free brokers 20px comparison take'

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Remote control featured by an elegant and refined design 433Mhz

VY350w    Waterproof locking gate magnet

VY500f   Waterproof gate locking magnet

Two-channel 433.92 MHz standalone receiver. Housing is IP54 (internal). 12 to 24 V ac/dc. Stores up to 50 remotes. Compatible with TOP, TAM, ATOMO D, TWIN and TTS coding.

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

The VD963A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

868.35 MHz surface-mounted, 12-key radio keypad selector, with blue backlight, 25 savable codes and password to access the programming mode. Settable in Rolling Code or Fixed Code mode.

433.92 MHz surface-mounted, 12-key radio keypad selector, with blue backlight, 25 savable codes and password to access the programming mode. Settable in Rolling Code or Fixed Code mode.

Aluminium hanging skirt in 2m lengths. Suitable for larger barriers. Springs will need to be upgraded or adjusted to take the extra weight.

Barrier arm for G4000 cabinets, white 60x40mm. There are slots in each corner to take the red rubber strip part G0403. The G0461 reflective strips are recommended.

FROG-CFN Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

FROG-PC Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

The SEL-B communicates with your phone using Wifi. Download the AUTOMATION BT app and operate the gate from your phone. If enabled, your phone can open the gate automaically when it is in range.

The SEL-B takes a multicore cable. Power is 12 or 24V ac/dc. The package is IP54 .     Click to view Bluetooth Selector Manual

Barrier arm for G6000 cabinets, white 100mm diameter. This arm fits the G0605 arm clamp. The G0461 reflective strips are recommended.

Tip support post for fixing to a barrier arm where a fixed tip support post is not suitable.

DOC-I Flush fitting safety or free exit photocells 20m range. ~ Replaced With The DLX30CIP

DLX30CIP - Direct Replacement

Complete kit for a sliding gate weighing up to 3500 kg / max width 17 m

Three-Phase	European Standards