Search results for: 'tg:sally530 10 base frog-a x track singl telegram gate'

Complete kit for a pair of swing gates weighing up to 300 kg per leaf / max width 4 m

Motor Features: Encoder	Motor Voltage: 230v
Max Length: 4m	Max Weight: 300Kg

 

CAME Connect	Encoder Motor	European Standards

Learn More

Complete kit for a pair of swing gates weighing up to 300 kg per leaf / max width 7 m

Motor Features: Encoder	Motor Voltage: 230v
Max Length: 7m	Max Weight: 300Kg

 

CAME Connect	Encoder Motor	European Standards

Learn More

ATS-P324   Complete kit for a pair of swing gates weighing up to 400 kg per leaf / max width 3 m

Motor Features: Encoder / Low Voltage	Motor Voltage: 24v
Max Length: 3m	Max Weight: 400Kg

 

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Learn More

ATS-P524   Complete kit for a pair of swing gates weighing up to 400 kg per leaf / max width 5 m

Motor Features: Encoder / Low Voltage	Motor Voltage: 24v
Max Length: 5m	Max Weight: 400Kg

 

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Learn More

FA.T80   CoBRA programmable beam

Specification: 7 fixed ranges plus full adjustment 10-30V dc   10-24V ac Iq = 65mA, Idetect = 28mA Dimensions 37 x 36 x 108mm Environmental rating – IP65 0.8A @ 30Vdc volt free N/O or N/C Operating temp -10° C to 60° C

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Learn More

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

Learn More

LOCK81 Single cylinder electric lock

Learn More

White painted aluminum 90 x 60 mm, complete with internal reinforcement, hollow cover profiles and shockproof rubber profile. Length: 4220 mm.

Learn More

FROGAE  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 3.5 m leaves that weighs up to 400 kg.

Motor Features: Encoder	Motor Voltage: 230v
Max Length: 3.5m	Max Weight: 400Kg

 

CAME Connect	European Standards	Encoder Motor

Learn More

FA.T80   CoBRA programmable beam

Specification: 7 fixed ranges plus full adjustment 10-30V dc   10-24V ac Iq = 65mA, Idetect = 28mA Dimensions 37 x 36 x 108mm Environmental rating – IP65 0.8A @ 30Vdc volt free N/O or N/C Operating temp -10° C to 60° C

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Learn More

VY280t   Locking doo magnet with timer

Functions: 280kg holding force Dual voltage 0, 3, 6, or 9s delay on timer Monitored with LED Aluminium base plate

Technical features: 12-24V dc  Form C monitor relay 1A @ 12V 250 x 42 x 26mm

Learn More

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

Learn More

RIY077 is a tri-lobe manual release key. It is used to open most Came sliding gate motor manual release covers. Once inside the sliding gate release compartment, there is a yellow knob to turn.  It also fits the manual release mechanism on Came FROG underground motor systems fitted with the A4365 release. These keys are sold singly, or in a box of ten. 

Learn More

VY500f   Waterproof gate locking magnet

Functions: 500kg holding force Dual coil, dual voltage Stainless steel housing Face fix to gate

Technical features: 12Vdc 480mA, or 24Vdc 240mA 222 x 62 x 38mm

Learn More

VY350w    Waterproof locking gate magnet

Functions: 350kg holding force Dual coil, dual voltage Stainless steel housing Side fix to aluminium chassis

Technical features: 12Vdc 450mA, or 24Vdc 225mA 228 x 47 x 29mm

Learn More

Post with counter-weight and chain latch. for: CAT-X – CAT-X24 - CAT-X110 - CAT-X24110 Learn More

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

Learn More

Operator with 24 V motor, featuring a control board with dip-switch settings, on-board radio decoding, movement and obstruction-detection control for sliding gates weighing up to 400 kg that are up to 10-m long

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 10m	Max Weight: 400Kg

 

CAME Connect	European Standards

Learn More

Operator with 230 V motor, featuring a control board with programming display, on-board radio decoding and mechanical limit-switches for sliding gates weighing up to 1,800 kg that are up to 20-m long.

Motor Features: Limit Switches	Motor Voltage: 230v
Max Length: 20m	Max Weight: 1800Kg

 

CAME Connect	European Standards

Learn More

Operator with 230 V motor, featuring a control board with programming display, on-board radio decoding and mechanical limit-switches for sliding gates weighing up to 2,200 kg that are up to 20-m long.

Motor Features: Limit Switches	Motor Voltage: 230v
Max Length: 20m	Max Weight: 2200Kg

 

CAME Connect	European Standards

Learn More