Search results for: 'tg:sally530 gard power ati5 secur deciphering the tuned dailyfx'

VY500f   Waterproof gate locking magnet

Deluxe Gard GT4 barrier kit for road widths of up to 4m. Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Deluxe Gard GT8 barrier kit for road widths of up to 8m.  Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Semi-oval section barrier arm in white aluminum alloy.  A yellow rubber bump strip is fitted in a groove under the arm. Arm length is 4m for 3.75m opening.

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Oval section barrier arm in white aluminum alloy. This version does not have the yellow bump strip. The arm has side grooves with a cover strip for the optional lighting pipe. Arm length is 4 m for a 3.75m opening.

White painted tube-section aluminum boom, with groove covering profile. Ø 100 mm, boom length: 2-6 m.

Two way sprung loaded keyswitch. High security euro-cylinder. 

Used for hold to run applications such as roller shutter opening and closing. Hold to run is also required for automation where safety is critical, and the operator is required to to have visual contact with the risk zone.

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

FTL-P   Complete kit for a pair of swing gates weighing up to 200 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Complete kit for a sliding gate weighing up to 1000 kg / max width 20 m

CAME Connect	European Standards

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Two-channel 433.92 MHz standalone receiver. Housing is IP54 (internal). 12 to 24 V ac/dc. Stores up to 50 remotes. Compatible with TOP, TAM, ATOMO D, TWIN and TTS coding.

Complete kit for a single swing gate weighing up to 200 kg / max width 1.8 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 3500 kg / max width 17 m

Three-Phase	European Standards

FAST70-S  Complete kit for a single swing gate weighing up to 200 kg / max width 2.3 m

CAME Connect	European Standards

Complete kit for a pair of swing gates weighing up to 200 kg per leaf / max width 1.8 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 400 kg / max width 10 m

CAME Connect	European Standards