Search results for: 'plug in radio card'

868.35 MHz plug-in radio frequency card.

433,92 MHz plug-in radio frequency card.

R700 plugs into recent PCB's to interface card reader selectors to the control panel.

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

Radio-frequency and WiFi Smart Home Gateway, with one App to manage all connected devices, remotely or on site.

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

Control card kit for operating during power outages and for recharging batteries, with battery housing

Control board for decoding and access-control management via keypad selectors. R800 plugs into recent control panels.

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

Keypad with 12 keys for code entry.  The codes are held in the compatible controller. Connection is made on a 2 core cable to the controller.

Click to view SELT1 manual

FTX-P   Complete kit for a pair of swing gates weighing up to 200 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

FTX-S   Complete kit for a single swing gate weighing up to 200 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Ethernet Gateway module with built-in radio, with the CAME CONNECT dedicated system (002RSE module included). For controlling up to five slave modules.

Complete kit for a sliding gate weighing up to 1000 kg / max width 20 m

CAME Connect	European Standards

ATS-S324   Complete kit for a swing gate weighing up to 400 kg per leaf / max width 3 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Complete kit for a sliding gate weighing up to 3500 kg / max width 17 m

Three-Phase	European Standards

433.92 MHz surface-mounted, 12-key radio keypad selector, with blue backlight, 25 savable codes and password to access the programming mode. Settable in Rolling Code or Fixed Code mode.

FAST70-S  Complete kit for a single swing gate weighing up to 200 kg / max width 2.3 m

CAME Connect	European Standards

Complete kit for a single swing gate weighing up to 200 kg / max width 1.8 m

CAME Connect	European Standards

Complete kit for a pair of swing gates weighing up to 200 kg per leaf / max width 1.8 m

CAME Connect	European Standards