Replacement bearing part for FROG ground casements with the adjustable stop upgrade supplied with FROG-CN models. This part will fit earlier types. Fitting on site. Basic tools required, but the gate ..

COMBI 787 supporting housing..

Material: ABSChip model: TK4100/T5577/NXPS50/UL/F1108/I-CODE-2  Operation frequency: 125KHZ/13.56MHZ  Memory size: 96bit/512bit/1kByteRead and write times: 100000 timesData retenti..

Counter balance spring for GARD barrier. YELLOW spring - 40mm diameter. ~..

Dome shaped flashing light for fitting to the top of GARD barriers. ~..

Support bracket to fit DIR and DBC photobeams to the side of a GARD barrier. ~..

Fixed tip support post for GARD series (grey) barriers. ~..

Mobile tip support post for GARD series (grey) barriers. ~..

Red reflective sticker pack for barrier arms. Contains 20 lengths. ~..

Arm lighting strip for a 4m arm on a GARD4 or GARD8 barrier (grey). Supplied with the connecting cord. ~..

Arm lighting strip for a 6m arm on a GARD8 barrier (grey). Supplied with the connecting cord. ~..

Arm lighting strip for a 8m arm on a GARD8 barrier (grey). Supplied with the connecting cord. ~..

White semi-eliptical tubular arm with sloted bottom and impact resistant rubber edge. Overall length 4m. ~..

Articulation for semi eliptical arms. Articulation allows the arm to turn 90 degrees as the arm rises. Used in low headroom areas. Available for left hand or right hand barrier cabinets. ~..

Profiled barrier arm, 4m long, 100mm diameter, with mounting slots for lighting strips and accessories below the arm. Standard arm profile for GARD8 barrier cabinets. ~..

Counter balance spring for GARD barrier. GREEN spring - 50mm diameter. ~..

Hanging skirt for rising arm barriers in 2m lengths. The skirt folds against the amr as the arm rises. Skirt can be cut down to shorter lengths. The skirt is supplied with aluminium fixings. Care need..

Profiled barrier arm, 6m long, 100mm diameter, with mounting slots for lighting strips and accessories below the arm. Standard arm profile for GARD8 barrier cabinets. ~..

Counter balance spring for GARD barrier. RED spring - 55mm diameter. ~..

Spare batteries for remotes TOP262/4, TOP302/4, TOP432S, TWIN and others. ~..

Spare pair of batteries for slim remotes TOP432NA, and TOP434NA. ~..

Replacement window for DOC-E or DOC-I photocells, price is for one window. ~..

Main shaft and crown wheel for FROG-A gearbox. Workshop fitting recommended. No special tools required. Takes about 60 minutes to replace. ~..

Intermediate shaft and whith bearings for FROG-A gearbox. Easy to replace on site saving the need to disconnect cables. The motor must be lifted free first. Only basic socket set required. Takes about..